Products
Buy Customized Hot Finished Nickel Based Alloy Seamless Pipe in China
- View as
Inconel 625 Pipe For Oil And Gas
Inconel 625 pipe for oil and gas applications is a high-performance nickel alloy tubular solution designed for extreme sour-service environments where chloride-induced pitting, crevice corrosion, and sulfide stress cracking can compromise conventional stainless steel and duplex alloys.
High Strength Alloy Steel Tube
A high strength alloy steel tube is engineered for pressure systems where repeated mechanical and thermal stress is the norm rather than the exception — compressor discharge lines, boiler feedwater loops, offshore risers, superheater assemblies, and sour-gas networks in continuous-duty plants. Unlike commodity structural tubing rated only for static loads, these tubes must survive tens of millions of load reversals over a design life of two decades, so fatigue performance outweighs any headline tensile figure on a datasheet.
Nickel Alloy Hot Extruded Seamless Pipe
As a specialized Chinese manufacturer of Nickel Alloy Hot Extruded Seamless Pipe, Jilaida employs the hot extrusion process—in which a heated billet is forced through a die in a single operation—to produce high-quality nickel alloy hot-extruded seamless pipes. Compared to cold-drawn pipes (which suffer from low yield rates and high scrap levels) and welded pipes (which have weak points at the longitudinal weld seam), this method offers significant advantages: a yield rate exceeding 95%, material loss of less than 5%, zero weld defects, continuous grain flow, uniform wall thickness, and a smooth inner bore.
Superalloy Seamless Tube
Superalloys hold their strength at temperatures where stainless steel has already softened and deformed — and the superalloy seamless tube from Jiangsu Ji Lai Da Nickel-Based Alloy Co., Ltd. covers the grades that make that difference matter: Inconel 718 (UNS N07718), N06625 (Inconel 625), Hastelloy C276 (UNS N10276), HC-22 (UNS N06022), and N08031 (Alloy 31). These are not upgraded stainless steels; they are fundamentally different metallurgical systems built on nickel or nickel-iron-chromium matrices with controlled additions of molybdenum, niobium, titanium, and tungsten, engineered for service above 600 °C, in corrosive gas streams, under mechanical stress, or any combination of the three.
Industries and Procurement Patterns
The buyers of Hot Finished Nickel Based Alloy Seamless Pipe fall into patterns that tell us more about the product than any list of applications.
Chemical Processing EPCs
These buyers send detailed RFQs with P&ID references and spec sheet attachments. They need MTC per EN 10204 3.1 minimum, often 3.2 with SGS witness. Lead time tolerance is tight because the pipe is on a project critical path. C276 and N08031 dominate.
Oil and Gas Operators
Sour service lines require NACE MR0175 compliance. The RFQ specifies H2S partial pressure and CO2 content. C276 is the default choice; N06625 appears in high-temperature wellhead piping. These buyers are concentrated in the Middle East - UAE, Saudi Arabia, Qatar - and typically request CIF delivery.
Aerospace and Defense Contractors
Inconel 718 and GH4169 for hydraulic lines, propulsion components, and pressure vessels. The procurement cycle is long: first-article qualification, supplementary testing, and lot traceability are mandatory. TUV or Lloyd's witness is common. These buyers value documentation over price.
Pharmaceutical and Semiconductor
Clean-service piping in C276 or N06625 with bright-annealed internal surfaces. Low volume but high margin. The buyer is a cleanroom contractor, not a corrosion engineer, and they need the tube to arrive with protective end caps and a certificate of cleanliness.
Research and Development
Universities and national labs ordering small quantities of unusual grades for test loops and prototype reactors. These buyers need flexibility on minimum order quantity, not the lowest price. We accommodate R&D orders because they often precede larger production contracts.
Quality System and Documentation
JILAIDA operates under ISO 9001 with four additional industry certifications. Every shipment of Hot Finished Nickel Based Alloy Seamless Pipe carries the following documentation package:
- Material Test Certificate per EN 10204 (3.1 standard, 3.2 on request)
- Chemistry analysis report (full elemental scan, traceable to heat number)
- Mechanical test report (tensile, yield, elongation, hardness)
- Dimensional inspection report (OD, WT, length, straightness)
- Visual surface inspection record
- Positive material identification (PMI) report if requested in the RFQ
- Supplementary test reports (ASTM G28, ASTM E213, hydrostatic) if specified
Each document carries the heat number that matches the stamp on the pipe. Third-party inspection by SGS, BV, or TUV can be arranged at our facility before loading. The complete document set ships in a waterproof sleeve attached to the outside of the wooden case.
Packing and Shipping
Pipe is packed in wooden crates with steel strapping. Each bundle is tagged with heat number, grade, size, quantity, and MTC reference number. End caps protect the bore during transit. Desiccant packs are included for bright-annealed shipments. We ship FOB from Shanghai, Ningbo, or Lianyungang. CIF and DDP are available - for DDP we coordinate inland transport to your warehouse and handle customs clearance. China manufacturer direct shipping typically reaches Middle East ports in 18 to 25 days, Indian ports in 12 to 18 days, and Southeast Asian ports in 7 to 14 days.
FAQ
Can you produce Hot Finished Nickel Based Alloy Seamless Pipe in grades not listed in the table?
Yes. The table covers our regular production grades. We have also produced N08825, N06030, GH4169, and Russian-standard grades like 03X20H25. Send your grade specification in the RFQ and we will confirm whether current tooling can handle it or whether new die fabrication is needed.
What is the minimum order quantity for nickel alloy pipe?
Standard grades (C276, N06625): 200 kg. High-performance grades (Inconel 718, HC-22): 100 kg. Sample lengths of 300 to 500 mm can be arranged for material qualification at reduced cost. R&D orders below minimum quantity are handled case by case.
How long does production take?
Standard sizes in C276 or N06625: 3 to 4 weeks from RFQ confirmation. Non-standard dimensions or rare grades: 5 to 8 weeks depending on billet availability and tooling. Qualification batches add 1 to 2 weeks for supplementary testing.
What is the price difference between C276 seamless extruded pipe and welded C276 pipe?
Typically 20 to 35 percent higher for seamless, depending on diameter and wall thickness. The premium reflects higher production cost (slower press speeds, tighter temperature control, higher reject rate risk) and is justified in any service where the weld seam would become a corrosion initiation point. For non-critical applications, welded C276 may be acceptable - we will advise honestly if your service conditions do not require seamless.
How do I start the ordering process?
Send an RFQ to JILAIDA with the six items listed in the "What a Complete RFQ Looks Like" section above. We respond within 24 hours with factory-direct pricing, lead time, and shipping estimate.
